**************************************** RELEASE NOTES **************************************** Chelsio FCoE Initiator for Windows ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ CHANGES ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Driver ====== Version : 2.0.9.0_WIN_006.0.87 Date : 06/30/2021 ================================================================================ - Drivers are WHQL certified. ================================================================================ ================================================================================ Version : 2.0.9.0_WIN_006.0.85 (Beta) Date : 05/21/2021 ================================================================================ VBD: - T{5,6} firmware updated to 1.25.6.0 ================================================================================ ================================================================================ Version : 2.0.9.0_WIN_006.0.83 (Beta) Date : 03/30/2021 ================================================================================ VBD: - T{5,6} firmware updated to 1.25.4.0 Firmware ======== Version : 1.25.6.0 Date : 05/21/2021 ================================================================================ Fixes ----- BASE: - Fixed backward compatibility issue in port type interpretation with vpd version 0x80. Enhancements ------------ ETH: - Rate limiting support added for encapsulated (vxlan, nvgre, geneve) NIC TCP packets. OFLD: - More than 128 SGLs supported in FW_RI_FR_NSMR_WR. Now, more than 16GB (upto 64GB) of PBLs can be written with single FW_RI_FR_NSMR_WR. ================================================================================ ================================================================================ Version : 1.25.4.0 Date : 03/30/2021 ================================================================================ Fixes ----- BASE: - Fixed Back to back T6 100G-CR4 link coming up with NO FEC sometimes. - Try to bring up link in 1G speed if link doesn't come up on 10G. - Fixed a bug to not allow BaseR fec in 100G speed. - Fixed linkup issues on BT adapter in 1G and 100M speed. - Fixed an issue to allow driver to send VI_ENABLE multiple times (once with rx disable and then later rx enable). - Fixed rate limiting not working on class number 16 to 30. ETH: - Fixed a case when firmware failed to deliver NIC WR completion to host. - No rate limit support for WR ETH_TX_PKTS2 due to performance reasons. OFLD: - Fixed a connection hang in SO adapters when tp_plen_max (set by driver) is more than the window size. - Added fw_filter_vnic_mode to firmware API file (t4fw_interface.h) - Use correct rx channel in coprocessor crypto completion (CPL_FW6_PLD). This was causing out of order completion to host. FOiSCSI: - Fixed a crash due to unaligned access of ipv6 address. - Fixed a crash during lun reset. Enhancements ------------ OFLD: - Disabled bottleneck bandwidth logic due to perf reason. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ERRATA (Open Issues) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ FCoE Storport Miniport ---------------------- - 33855: Need to add support for Virtual Fibre Channel SAN ******************************************************************************** Copyright (C) 2021 Chelsio Communications. All Rights Reserved. The information in this document is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Chelsio Communications. Chelsio Communications assumes no responsibility or liability for any errors or inaccuracies that may appear in this document or any software that may be provided in association with this document. Except as permitted by such license, no part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of Chelsio Communications.